Requirement
State what the complete solution must achieve for routine production using tablet counting into bottles, including your production pattern and who will review the result.
Filling and packaging systems
Tablet Counting Fillers Specification Checklist
Use this practical checklist to describe your requirements for tablet counting fillers around representative products, packs and packaging materials, line connections and required results.
A useful specification for tablet counting fillers describes your operating range, line connections and required results while leaving room for the supplier to propose the best method.
Use this checklist for routine production using tablet counting into bottles and separate confirmed facts, realistic ranges and items that need a trial.
On the production floor
Describe what the complete process needs to achieve — Tablet Counting Fillers
Plan tablet counting fillers around your product, pack range, target output, cleaning needs and finished-pack checks. Discuss a practical line concept with Lancing using representative samples. A clear brief should state the operating range for tablet counting into bottles product behaviour and your requirements for finished-pack checks and reject handling.
Discuss your application
Your checklist
Application, operation and results
Product, part or pack
Operation and interfaces
Results and support
Write measurable requirements
For Tablet Counting Fillers, turn each checklist item into a range and a test
Range
Record normal and credible extremes for tablet counting into bottles product behaviour, container, bag or pack range and target dose, count or pack weight; avoid relying on one nominal value.
Check
Define representative examples from routine production using tablet counting into bottles, the method, repetitions, acceptable range and result record so you and the supplier share the same expectation.
For tablet counting fillers, use “shall” only for a requirement that can be demonstrated. Keep preferences, assumptions, provisional line connections and future options clearly separate.
Connected responsibilities
Be clear about what sits around your tablet counting fillers
Your final tablet counting fillers scope must also account for cleaning, access and changeover method, finished-pack checks and reject handling, current regulations and the conditions at your site.
- The selected method must be trialled with representative product and packaging.
- Supplier tolerances and product-condition changes can alter handling or fill behaviour.
- Equipment selection does not replace product, hygiene, packaging or regulatory validation.